By Product By Brand

ioLogik E2210 Active Ethernet I/O server, 12 DI, 8 DO, Modbus/ TCP - Product Code:96062705

Moxa ioLogik E2210/E2212/E2214 distributed Ethernet remote I/O module
£ 221.41
ioLogik E2210 Active Ethernet I/O server, 12 DI, 8 DO, Modbus/ TCP

1.Digital inputs or event counter (no memory on E2210)
2.Digital outputs with pulse mode
3.Modbus/ TCP Ethernet interface
4.Unicode Active messaging with real-time clock
5.Peer-to-Peer I/O without controller
6.SNMP to I/O mapping
7.Easy local control with "Click & Go" logic
8.Drivers for Visual Basic, VB.Net, VC++, C# and Borland Builder

Type Inputs Outputs Prgrammable I/O Counter memory
E2210 12 8 - No
E2212 8 8 4 input or output Yes
E2214 6 6 Form A relays - Yes
Digital inputs Source type inputs or counters
Dry contact Low: Connect to Gnd- High: Open circuit
Wet contact Low: 0 to 3Vdc- High: 10 to 30Vdc
Counter input Maximum frequency: 900Hz
Digital outputs Sink type- or pulse output
On-state voltage 24Vdc nominal
Pulse output (low or high) Min 0.5ms- max 32-767ms
Pulse train length Continuous or up to 232
Programmable I/O (E2212 only_ 4 digital lines can be inputs or outputs
Relay outputs (E2214 only) Normally Open; 5A@30Vdc
Ethernet 10/100Mbps- RJ45
Protocols Modbus/ TCP- TCP/IP- UDP- Bootp- SNMP- HTTP- Active I/O messaging
Serial interface RS485 (2-wire) for expansion
Protocol Modbus/ RTU
Optional display LCD module with 2x16 text and 5 buttons
Power requirements 12-48Vdc
Field power 24Vdc nominal
Operating temperature -10 to +60°C


SecurityMetrics Credit Card Safe Comodo authentic site
Test and Measurement  I  PXI Test Equipment  I  PC based Data Acquisition  I  Automation & Control  I 
© Amplicon Liveline 2019