By Product By Brand

ICP DAS USB-2068-18 10-channel Digital Input, 8-channel Relay Output Module - Product Code:96172524

ICP DAS USB-2068-18
£ 153.66
ICP DAS USB-2068-18 10-channel Digital Input, 8-channel Relay Output Module

1.10-channel digital input and 8-channel relay output.
2. Dry Contact and Wet Contact Selectable via Wire Connections 
3.All Digital Input Channels can used as 32-bit Counters 
4.Form C Relay Output 
5.8kV ESD protection 
6.Wide Operating Temperature Range 
7.3000 VDC Intra-Module Isolation

Interface USB 2.0 Full-Speed
Watchdog 1 Hardware watchdog (1.6 second)
1 Software watchdog (Programmable)
Intra-Module Isolation; Field-to-Logic 3000 VDC
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH; non-condensing
Relay output  
Relay output channels 8
Relay output type Type C
Contact Rating (Resistive Load 0.25 A @ 250 VAC
0.24 A @ 220 VAC
2 A @ 30 VDC
Operate Time 3 ms (typical)
Release Time 4 ms (typical)
Insulation Resistance 109 Ohm at 500VDC
Dielectric Strength Between Open Contact: 1000 Vrms (1 min.)
Between Coil and Contacts: 1500 Vrms (1 min.)
Endurance Mechanical: 1 x 108 ops
Electrical: 2 x 105 ops (at 30 V / 2 A)
Power On Value Yes
Safe Value Yes
Digital Input / Counter  
Channels 10
Type Dry Contact Close to GND
Wet Contact Sink/Source
On Voltage Level +10 ~ 50 VDC
Off Voltage Level +4 VDC Max
Counters Max. Count 65535 (16-bit)
Max. Input Frequency 500 Hz
Min. Pulse Width 1ms
Input Impedance 10 K Ohm
Overvoltage Protection 70 VDC


SecurityMetrics Credit Card Safe Comodo authentic site
Test and Measurement  I  PXI Test Equipment  I  PC based Data Acquisition  I  Automation & Control  I 
© Amplicon Liveline 2019