By Product By Brand

ioLogik 2542-HSPA-T, HSPA remote I/O, Click&Go Plus, 4 AIs, 12 DI/Os,-30 to 70°C - Product Code:96152688

moxa iologik 2542gprs smart remote io
£1187.74
ioLogik 2542-HSPA-T, HSPA remote I/O, Click&Go Plus, 4 AIs, 12 DI/Os,-30 to 70°C

Features
1.New Click&Go Plus Logic for powerful frontend intelligence
2.Transforms Modbus RTU into Modbus TCP or Active Tags
3.optimised I/O expansion port for daisy chaining up to 8 ioLogik E1200 units
4.Built-in datalogger with FTP server and micro SD (up to 32GB) supported
5.alarm Management methods: Email, SNMP traps, TCP, UDP
6.Protocols supported: Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMtp
7.5 Years Warranty
 


Specifications
Analog Inputs 4 channels
Configurable DI/Os 12 channels
Isolation 3k VDC or 2k Vrms
Resolution 16 bits
Sensor Type Wet Contact (NPN or PNP) and Dry Contact
Counter frequency 2.5kHz
I/O Mode DI or Event Counter
Dry Contact on: short to GND / off: open
Wet Contact on: 10 to 30 VDC / off: 0 to 3 VDC
Ethernet 4 Switched 10/100Mbps RJ45 ports & 1 optimised port for faster downstream communications
Cellular GPRS Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz
Cellular HSPA Five-Band UMTS/HSPA+ (WCDMA/FDD) 800/850/AWS1700/1900/2100 MHz
Sampling rate All channels: 400 samples/sec & per channel: 100 samples/sec
Power requirements 24 VDC nominal (9 to 48 VDC)
Operating temperature -10 to 60 (extended: -40 to 75)
Mounting DIN rail
 

FOLLOW US ON

SecurityMetrics Credit Card Safe Comodo authentic site
Test and Measurement  I  PXI Test Equipment  I  PC based Data Acquisition  I  Automation & Control  I 
© Amplicon Liveline 2019