Kvaser Memorator Light HS - 96105022
Kvaser Memorator Light HS - includes 1 Gbyte internal SD-memory 00513-6
Key Features
- Cost-effective CAN data-logger
- Ideal for use in the field - trucks, cars and boats
- Logs in silent mode, does not interfere with bus communications
- Easy to use USB2.0 interface
- 1GB of internal memory
- Higher storage capacity versions available on request
Plugging the Kvaser Memorator Light single channel, high-speed datalogger into a system’s CAN network provides access to a wide range of data without interfering with bus traffic, making hard-to-diagnose fault conditions considerably easier to track.
The Kvaser Memorator Light can be used straight out of the box - simply plug the datalogger into the system’s CAN port via the standard male 9 pin DSUB CAN connector and the device’s inbuilt autobaud function will automatically determine the bit rate. Memorator Light supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers, and bit rates from 10 Kbit/sec up to 1 Mbit/sec.
The messages recorded by Memorator Light are held in a circular buffer where the oldest data is overwritten when the buffer becomes full. A second circular buffer records 1000 messages before and after an error frame occurs.
- Brand
- Kvaser
- Max Operating Temperature
- 85 °C
- Min Operating Temperature
- -40 °C
- PC Interface
- USB
- Maximum Bitrate
- 1000 Kbps
- Type of Ports
- DSUB 9
- Input Voltage
- 6 to 40 VDC
- Type
- CAN interface
- Memorator Light HS Datasheet
- Datasheet 416.13 KB