PXI multifunction I/O modules

Amplicon supplies the wide range of NI (National Instruments) PXI multifuction I/O cards. The market leading range allows you to monitor signals or waveforms for integration into Windows based operating systems.

High speed digitisers offer the sampling speeds found in oscilloscopes, whereas multifunction cards can monitor up to 64 signals at lower speeds. Many products here also provide analog output signals which can output 8 waveforms simultaneously. High channel digital I/O can be provided with a CompactPCI card but it will not use the PXI triggers.

The power of NI PXI lies in its integration with NI software, offering you full compatibility, efficiency and feature performance. Learn more about NI Test software and PXI

SEE NI NATIONAL INSTRUMENTS FULL PRODUCT RANGE >

Product Range

Filter products

	NI PXI/e-6000 Multifunction IO series 12/18bit differential analogue inputs 14MS/s/ch (max), varying channel counts, 2 or 4 analogue outputs 4MS/s (max), up to 48 DIO From £1,810.00	Voltage measurements up to 4 MS/s per channel or 18-bits Simultaneous sampling architecture Software-selectable input ranges and input channel isolation available Upto 48 DIO channels

	NI PXI/e-5000 Vector Signal Analyser series Up to 765 MHz wide frequency range, real-time signal analysis, and advanced signal processing. From £44,100.00	Up to 765 MHz of instantaneous bandwidth Current measurements up to 3 A Best-in-class dynamic range, noise floor, and phase noise Support for wireless standards including 802.11ax and LTE Advanced LabVIEW-programmable FPGA

	NI PXI/e-5000 Waveform Generator series Up to two 16-bit channels, updated at 800MS/s with 20, 40, and 80 MHz bandwidth From £3,560.00	One or two 16-bit channels updated at 800 MS/s with 20, 40, and 80 MHz bandwidth Maximum ±12 V and minimum ± 7.75 mV output ranges Up to 34 channels to build parallel, highchannel-count systems in a single PXI chassis Waveform sequencing and streaming with a PCI Express generation 1 x4 link

	NI PXI/e-4000 Programmable Power Supply Series Programmable DC power supplies for design validation, and manufacturing testing From £3,140.00	Up to three isolated, 60 W channels per module Hardware timing and triggering Output disconnect relays Four-wire remote sense Built-in voltage and current readback

	NI PXI/e-4000 Source Measure Unit Series Source Measure Units combine power, precision, and speed into a single instrument From £6,410.00	Four-quadrant source and measure capability Up to 20 W DC and 500 W pulsed output SourceAdapt digital control loop technology High-speed sampling rate up to 1.8 MS/s High-speed update rate up to 100 kS/s

	NI PXI/e-5000 Oscilloscope series Up to eight channels with speeds of up to 12.5 GS/s and bandwidth of up to 5 GHz From £3,760.00	2 analogue channels 8 to 24 Bit resolution 60 MS/s to 12.5 GS/s sampling rate 100 MHz – 5 GHz analogue bandwidth Edge, digital, immediate, and software standard triggers

	NI PXI/e-4000 Digital Multimeter Series Performs voltage, current, resistance, temperature, inductance, capacitance, and frequency/period measurements From £1,810.00	Voltage measurements up to 1,000 VDC (700 VAC) Current measurements up to 3 A Resistance measurements up to 5 G/Ohm Up to ±500 VDC/VRMS common-mode isolation Up to 1.8 MS/s isolated, 1,000 V waveform acquisition

	NI PXI/e-4000 Analog Input Series Modules feature sample rates from 5 kS/s/ch to 20 MS/s, up to 28 bit and up to 32 channel From £3,460.00	Voltage measurements up to 2 MS/s per channel or 28-bits Simultaneous sampling architecture Software-selectable input ranges and input channel isolation available Anti-alias and Low-Pass filtering available